All the flat roof membrane adhesives that you require including EPDM glue and EPDM caulks to lay your flat roof. There are a variety of ways to glue any of our single ply membranes down. There is the KS137 contact adhesive which is the glue shown in the videos and is recommended for most installations of the rubber. For larger installations with any of our EPDM rubber membranes you can also use the KS205 which comes in its own pressurised canister and is a slow setting, easy to use spray on, contact adhesive. We also have KS96 and KS143 bonding adhesives, for jointing the rubber sheets together.
Black Mastic used to waterproof chase out between wall trims and brickwork
Please only use this primer with ClassicBond Rubber – Required for the edges of the EPDM Sheet when jointing 2 sheet together, please also use a EPDM Strip. Coverage: 0.5 Ltr / m2 when applied to both sides
ClassicBond Water Cut off Mastic for sealing to adjacent roofs / top of pipe boots / upstands.
ClassicBond Lap Sealant used to waterproof roof membrane junctions in addition to tape products
Please only use this adhesive with ClassicBond Rubber – Required for the edges of the EPDM Sheet. Coverage: 0.5 Ltr / m2 when applied to both sides
Please only use this primer with ClassicBond Rubber – Required for the edges of the EPDM Sheet when jointing 2 sheet together, please also use a EPDM Strip. Coverage: 0.5 Ltr / m2 when applied to both sides
This 0.9kg tin of KS137 is used for gluing our Hertalan and PRO-EPDM rubber systems. Its used as a contact adhesive and needs to be left to go almost dry. This 0.9kg tin will cover approximately 2sq.m on a smooth surface, you will need more adhesive if gluing to a rough surface.
This bonding mastic is used to seal joints between spliced membranes and can be used as a bonding adhesive/sealant for façade installations. These tubes require a normal mastic gun. Each 290cc tube will do 1 bead of mastic 8 metres long.
HERTALAN FS14 is a high-quality, durably elastic black single-component adhesive glue based on synthetic rubber.
Please only use this primer with ClassicBond Rubber – Required for the edges of the EPDM Sheet when jointing 2 sheet together, please also use a EPDM Strip. Coverage: 0.5 Ltr / m2 when applied to both sides
FG35 Primer to use on Resitrix and Hertalan ESK self adhesive epdm. This is applied with a decorators roller and at a rate of 250g per m2 Coverage: 2 to 4 sqm
Please only use this adhesive with ClassicBond Rubber – Required for the edges of the EPDM Sheet. Coverage: 0.5 Ltr / m2 when applied to both sides
ClassicBond Water Based Adhesive is a high strength low odour water based acrylic adhesive is specifically designed for use with ClassicBond EPDM roofing membrane to a range of deck surfaces. Please only use this adhesive with ClassicBond Rubber.
This bonding mastic is used to seal joints between spliced membranes and can be used as a bonding adhesive/sealant for façade installations. These foils require a special application gun available in the related products below.
FG35 Primer to use on Resitrix and Hertalan ESK self adhesive epdm. This is applied with a decorators roller and at a rate of 250g per m2 7 to 10 sqm coverage
ClassicBond Water Based Adhesive is a high strength low odour water based acrylic adhesive is specifically designed for use with ClassicBond EPDM roofing membrane to a range of deck surfaces. Please only use this adhesive with ClassicBond Rubber.
Please only use this adhesive with ClassicBond Rubber – Required for the edges of the EPDM Sheet. Coverage: 0.5 Ltr / m2 when applied to both sides
This 5.3kg tin of KS137 is used for gluing our Hertalan EPDM and PRO-EPDM rubber systems. Its used as a contact adhesive and needs to be left to go almost dry. This 5.3kg tin will cover approximately 10sq.m on a smooth surface, you will need more adhesive if gluing to a rough surface.
This is the 3 metre hose for the KS205 system it connects the canister to the pistol/lance and once connected should only need replacing if it gets damaged.
This is a slow curing bonding adhesive. It is poured onto the substrate only and then left for a short period. When ready the membrane is rolled into the adhesive and bedded in by using a soft broom to brush the surface. Always use KS137 at the roof edges and/or changes of angle or around abutments (minimum 150mm on horizontal surfaces and all vertical...