ClassicBond 6 inch cover tape
ClassicBond 6 inch cover tape used as a cover strip where joining two pieces of membrane where there is no overlap and a 3" splice tape can not be used.
Sold per linerat meter
Used as a cover strip where joining two pieces of membrane where there is no overlap and a 3" splice tape can not be used.
The EPDM surfaces to receive the tape must be dry, clean and free from dust and dirt. Wherever flashing strips are to be adhered to any other EPDM rubber the surface must be primed with ClassicBond Rubber Primer and allowed to dry (Touch dry)
Bonding to other surfaces: The tapes and splice tape can be used to join the EPDM rubber membrane on to both TPO and PVC roofing systems. The tapes are often used to repair damaged TPO and PVC as a cost effective alternative to replacing the whole flat roof. When joining the rubber membrane to uneven or granular built up roof surfaces, such felt or Asphalt, we recommend the use of a Termination bar and water cut off mastic (water block)
- 150mm (6")
You might also like