Ex Vat Inc Vat

ClassicBond Primer 1Ltr

£21.50 Ex Vat £25.80 Inc Vat
VAT excluded

Use this primer with ClassicBond Rubber

Required for the any accessory, corner patch or ClassicBond tapes

Same day dispatch if ordered before 12pm

100% secure payments

Used for ClassicBond EPDM Rubber Primer used to bond tapes and accessories to EPDM Rubber membrane

Used for EPDM Rubber membrane to:

  • 3 inch Splice Tape
  • 6 inch Cover Tape
  • 9 inch Elastoform
  • Pipe boot
  • Internal Drain using 9" Elastoform etc

Available in three sizes: 250ml / 500ml / 1 L

ClassicBond EPDM Rubber Primer 250ml A 0.25 Litre Tin will cover the following

  • Coverage: 6.5 Metres of 3" Splice Tape (For Both Sides)
  • Coverage: 6.5 Metres of 6" Cover Tape
  • Coverage: 4.5 Metres of 9" Elasoform Tape

Note: Do not use this primer to adhere membrane to membrane without the use of splice tape


  1. Apply to EPDM rubber membrane only do not apply to tapes directly using a paint brush or scrubbing pad.
  2. Make sure the primer is even and does not puddle.
  3. Ensure that the primer is touch dry prior to applying mating parts

Data sheet

Glue Type

You might also like