ClassicBond Water Based Deck Adhesive 5Ltr
ClassicBond Water Based Adhesive is a high strength low odour water based acrylic adhesive is specifically designed for use with ClassicBond EPDM roofing membrane to timber deck surfaces.
Please only use this adhesive with ClassicBond Rubber.
The ClassicBond Water Based Acrylic Deck Adhesive is a nonflammable, acrylic based product. It is specifically developed to bond ClassicBond EPDM roofing membrane to a range of deck surfaces. For example, conventional timber roof surfaces like plywood or OSB3.
The adhesive has excellent strength without containing any solvents or strong odours. Suitable for use on flat roofs the wet lay adhesive is designed to be roller applied and used as a one sided adhesive on flat roof decking surfaces.
Features and Benefits
- Coverage rates of up to 3-4m²per litre
- Non Flammable, low odour adhesive
- Fast Application rates
- Size: 2.5 Litres (Coverage 7 to 10 sqm)
- Size: 5.0 Litres (Coverage 15 to 20 sqm)
- Size: 7.5 Litres (Coverage 25 to 30 sqm)
- Size: 10 Litres (Coverage 35 to 40 sqm
- Size: 15 Litres (Coverage 50 to 60 sqm)
N.B. Roofs over 100 Square Metres should be installed with Contact Bonding Adhesive rather that this Water Based Deck Adhesive.
All boards should be resistant to moisture but not sealed with adhesive repellent waxes or other nonabsorbent systems. If in doubt a small test area should be laid.
Certain roof surfaces may not be suitable for use with this adhesive, for example, non-porous such as metal or existing GRP, for these surfaces Contact Bonding Adhesive may be a more suitable alternative.
- Glue Type
- Water Based Adhesive
- 15 - 20sq.m
You might also like