Ex Vat Inc Vat
search

Classic Liquid Top Coat 15KG

£119.70
£119.70 Ex Vat £143.64 Inc Vat
VAT excluded

ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.

The ClassicLiquid TopCoat can be applied in different thicknesses for different guarantee periods

Quantity
Same day dispatch if ordered before 12pm

ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer.

The ClassicLiquid TopCoat can be applied in different thicknesses for different guarantee periods. The minimum application rate is 1.5Kg/sqm meaning this 15Kg tin will cover approximately 10sqm For longer guarantees please use the coverage rates below:

10 year - 1.5Kg/sqm (15Kg = 10sqm)
15 year - 2.1Kg/sqm (15Kg = 7.2sqm)
20 year - 2.5Kg/sqm (15Kg = 6.0sqm)
20 year Balcony / Walkway - 2.5Kg/sqm + 300g/sqm in conjunction with Quartz Aggregate. (15Kg = 5.5sqm)

Application

  • Firstly begin by ensuring that the existing roof covering has been cleaned using a stiff broom or high pressure washer to remove all contaminants, it should then be left to dry.
  • Make good all cracks and blisters and fill any surface irregularities. ClassicLiquid Joint Mastic can be used to seal cracks and any joints between the roof surface and any upstands.
  • Apply ClassicLiquid Primer at the appropriate rate to all areas that will be covered by the Classic Liquid Top Coat or ClassicLiquid Detailer and allow to dry. See separate instructions for different substrate coverage rates and drying times. 
  • ClassicLiquid Detailer is used to coat all vertical surfaces and roof details. Detailer is thixotropic so will not slump as it contains reinforcing fibres. 
  • Use ClassicLiquid Reinforcing Fabric to reinforce T&G OSB3 boards and fully reinforce when over laying bituminous felt. 
  • ClassicLiquid Top Coat is then applied at a minimum rate of 1.5kg per square metre in one or two coats to achieve a bubble free even application.

Recommended For Overlaying

  • Asphalt & Bitumen Roofs
  • GRP Roofing Systems
  • OSB3 T&G Structural Roof Decks
  • Metal and Fibre Roof Decks
  • Gypsum & Cement Boards
  • Concrete Roofs

Why ClassicLiquid?

  • Very cost effective 
  • Showerproof in 30 minutes
  • Trafficable in 24 hours
  • Single coat (of membrane) application possible
  • Bubble free smooth finish
  • Easy to apply 
  • Excellent weather & UV resistance
  • Will remain elastic down to – 40°c
  • Will not soften in high temperatures
  • High tensile and tear strength, excellent abrasion resistance
  • Seamless finish
CL-TOP

Data sheet

Brand
ClassicLiquid
Size
15.0kg
Guarantee Length
Upto 20 Years

You might also like