Warm Deck Insulation Fixing for Steel Deck – 180mm Insulation (Box 100)
Steel deck insulation fixing with tube washer and screw for 180mm insulation / build up (Please see image attached or see below for infomation on this).
For Steel Decks from 0.7mm to 1.2mm.
Recommended P2 Drill Bit – 200mm
Warm roof insulation fixing for steel deck, insulation tube washer and screw to suit 180mm of insulation.
Designed for Steel Decks from 0.7mm to 1.2mm.
Drill Bit – P2 200mm.
What size insulation fixing do you need?
Our warm deck insulation fixings are available for both timber and steel decks.
The fixing size is the depth of the materials from the lower deck upwards.
A steel fixings allow for a 0.7 – 1.2mm deck. The screw will then protrude the lower edge of the deck by 12mm. The following diagram shows most standard roof build-ups.
What will I receive?
You will get the correct tube and screw combination for the height of your roof build-up.
These are chosen by the manufacturer in conjunction with the major insulation manufacturers.
How many fixings do I need?
For a 2400mm x 1200mm board we recommend 12 fixings per board. If your project is exposed or is in a high wind area this should be increased to 16.
For a 2400mm x 600mm T+G board we recommend 8 fixings per board.
For a 1200mm x 1200mm board we recommend 9 fixings per board.
Do I need to fix through into the joists or firings?
No, the lower deck should be fixed to the joists and/or firings. The insulation only needs to be secured to the lower deck.
- Insulation / Roof Buildup Thickness
- Steel Deck
You might also like