Warm Deck Insulation Fixing for Plywood Deck – 150mm Insulation (Box 100)
Plywood deck insulation fixing with tube washer and screw for 150mm insulation / build up (Please see image attached or see below for infomation on this).
For Timber Decks 18mm Thick (Less than this contact us)
Recommended P2 Drill Bit – 150mm
Warm roof insulation fixing for plywood / timber deck with tube washer and screw to suit 150mm of insulation.
Designed for plywood / timber decks 18mm.
Drill Bit – P2 150mm.
What size insulation fixing do you need?
Our warm deck insulation fixings are available for both timber and steel decks.
The fixing size is the depth of the materials from the lower deck upwards.
A timber deck fixing allows for an 18mm lower deck, any less than 18mm please contact us as you will need a different product size. The screw will then protrude the lower edge of the deck by 12mm. The following diagram shows most standard roof build-ups.
What will I receive?
You will get the correct tube and screw combination for the height of your roof build-up.
These are chosen by the manufacturer in conjunction with the major insulation manufacturers.
How many fixings do I need?
For a 2400mm x 1200mm board we recommend 12 fixings per board. If your project is exposed or is in a high wind area this should be increased to 16.
For a 2400mm x 600mm T+G board we recommend 8 fixings per board.
For a 1200mm x 1200mm board we recommend 9 fixings per board.
Do I need to fix through into the joists or firings?
No, the lower deck should be fixed to the joists and/or firings. The insulation only needs to be secured to the lower deck.
- Insulation / Roof Buildup Thickness
- Timber Deck
You might also like