Fibreglass Bandage 75mm x 65m
This high-quality glass fibre bandage is used between the deck and the trims to cover joins in GRP roofing.
Bandage Taping Matt is used for reinforcing the roof in the following scenarios:
- Reinforcing OSB3 Square Edge Deck boards
- Any local reinforcement on the roof or trim joints
- The joints between edge trims and the substrate
Fibreglass jointing bandage suitable for tape joints and seems.
This is a general-purpose emulsion bound chopped strand mat designed to cover a wide range of applications by normal hand lay-up techniques. The mat is soft to handle and conforms well to complicated mould shapes. This mat has medium bulk and is capable of effective working over the range of resin to glass ratios. This high-quality mat is suitable for use with most types of unsaturated polyester resins. Resin penetration (wet through, or working time) is rapid with a fast strand wet out time.
Soft to handle with good conformity.
Medium bulk with good resin absorption characteristics.
Fast wet through and wet out.
Good air release.
Width : 75mm