Ex Vat Inc Vat
search

Flexitec 2020 Resin 20kg - Dark Grey

£148.50
£148.50 Ex Vat £178.20 Inc Vat
VAT excluded

Flexitec 2020 can be laid as a 10 year system by applying one coat of fully reinforced Flexitec 2020 Resin at the required coverage rate. IMPORTANT – the 10 year (one coat) application is only suitable for overlaying existing waterproof coverings and is not suitable for new decks (e.g. OSB3 or concrete) or porous surfaces.

Coverage Dependant on Chart and Guarantee Period

Quantity
Same day dispatch if ordered before 12pm

Flexitec 2020 can be laid as a 10 year system by applying one coat of fully reinforced Flexitec 2020 Resin at the required coverage rate. IMPORTANT – the 10 year (one coat) application is only suitable for overlaying existing waterproof coverings and is not suitable for new decks (e.g. OSB3 or concrete) or porous surfaces.

Flexitec 2020 can be laid as a 20 year system by applying a second coat of Flexitec 2020 Resin (no additonal reinforcement) at a coverage rate of 0.7 kg/m2 over the first coat. The second coat should be applied ideally within 48 hours.

The Flexitec 2020 System by Res-Tec is a flexible, single resin GRP system with full overlay and new deck capabilities. Combining the best elements of fibreglass with the versatility of overlay systems, no other flat roof solution performs at this level across so many applications.

Key Features

Flexitec 2020 is rapid curing with an extra-tough finish, 30-60 minute walk-over time. It can be applied to almost any roof surfaces including felt, asphalt, concrete, GRP, PVC single-ply, metal details and approved insulation boards.

The Flexitec 2020 system can be repaired or overcoated without grinding down. If applied as a one coat (10 year repair system) or two coat (20 year roofing system) system. Installations by trained installers of the two-coat system are supported by Res-Tec’s trusted 20 year materials guarantee.

Flexitec 2020 is highly flexible and suitable for any size or shape roof without the need for expansion joints. This is suitable for application in temperatures as low as 5°C (0°C using accelarator) and as high as 30°C and is a totally seamless membrane – no joints, no welds, no weak points.

RES-TEC
FT-Resin-20-DARK-GREY

Data sheet

Brand
RESTEC
Size
20.0kg
Guarantee Length
Upto 20 Years

You might also like